WASHING

1.The reusable alcohol is filtered through a 200 mesh filter bag before each cleaning operation to ensure the

cleanliness of the alcohol.

2.Soak the platform and model together into clean 95% alcohol, set the cleaning machine working time for 2min

and wait for the resin attached to the surface of the model to be rinsed clean.

3.Put the platform and model into clean 95% alcohol again, set the cleaning machine working time for 4min, anc

wait for the model to be cleaned.

4.Shovel the model off the platform and place it in a cool place to fully dry, wait for the model to fully dry and

then enter the post-curing process

CURING

Put the clean model into clean water, need to make sure that all models are immersed in water, set the curing

box time 30min, after curing use compressed air to blow dry the model can be .